Modular electric heating solution for walls and ceilings, easy to install during wall/ceiling construction, under plaster. Recommended both as a supplementary system (also to keep walls dry) and as a main heating system.
The application must be carried out on the wall both horizontally and vertically, ensuring that the heating side, labeled "Heating surface", faces the interior of the room. The power cable must be inserted into a corrugated tube inside the wall. All electrical connections must be made inside a junction box. The individual modules can be connected to the power supply in parallel.
The system can also be installed in bathrooms, following the precautions provided in the installation instructions. Elements are equipped with a temperature limiter set at 60°C.
Carbon fiber heating cables with thermal insulating strip on the bottom side, fixed onto an alkali-resistant fiberglass mesh. Total thickness approximately 5.00 mm.
Contact us now and you will soon receive an answer.
Contact us