Underfloor heating mesh is ideal for both types of working: new floors and renovations. Radiant heating principle of the system does not cause air movement and the bodies are heated directly, thus it is avoided dust and acrid circulation. The mesh has customized sizes and power.
NO HARMFUL ELECTROMAGNETIC EMISSIONS
The application must be performed carefully on clean and plain surfaces. Extremely reduced thickness of the heating layer, of 4,00 mm (0,16 in) allows interventions with minimal height. All the heating elements are connected to power in parallel, thus the system can operate even in case of partial damage, excluding from supply a floor area of 1,00 m² (10,76 ft²).
Carbon fiber heating cables with thermal insulation on the bottom, fixed on alkali resistant fiberglass mesh. Total thickness 4.00 mm (0.16 inch approx.).
Activation and deactivation of the heating system can be automatized using an electronic controller (T705) operating with temperature probe, which must be installed in the heated area. Some situations require the installation of power splitter (T801) for halving of the installed power in case of a reduced quantity of total power. Furthermore, the installation of a thermostat or chrono-thermostat is enough to control efficiently the temperature in the room.