Underfloor heating mesh is ideal for both types of working: new floors and renovations. Radiant heating principle of the system does not cause air movement and the bodies are heated directly, thus it is avoided dust and acrid circulation. The panel is available in modules of 12 standard dimensions (see the table).
NO HARMFUL ELECTROMAGNETIC EMISSIONS
The application must be performed carefully on clean and plain surfaces, following the indications provided by the installation diagram and linking the modules by aim of patented connectors with IP 67 protection degree. Extremely reduced thickness of the heating layer, of approximately 5,00 mm (0,2 inch approx.) allows interventions with minimal height. All the modules are connected to power in parallel, thus the system can operate even in case of partial damage, excluding from supply a floor area of 1,00 m² (10,76 ft²).
Carbon fiber heating cables coated by thermal conducting, insulating and reflecting layers. Total height of the panel is 5.00 mm (0.20 inch approx.).
Activation and deactivation of the heating system can be automatized by aim of an electronic controller for outdoor (T705) operating with temperature probe, which must be installed in the heated area. Some situations require the installation of power splitter (T801) for halving of the installed power in case of a reduced quantity of total power. Furthermore, the installation of a thermostat or chrono-thermostat is enough to control efficiently the temperature in the room.
IN ORDER TO OBTAIN THE TYPE AND QUANTITY OF HEATING PANELS AND ACCESSORIES AND HOW THEY WILL BE PLACED ON THE SURFACE TO HEAT, YOU CAN USE THE ON-LINE SOFTWARE AT: http://www.thermaltt.com/planner