The floor heating mesh for caravans and / or naval sector is a specific product for surfaces with pronounced structural, as well as mechanical stresses due to heavy foot traffic. Equipped with high strength and elasticity, it heats by radiation, without air movements. The bodies are heated directly, thus avoiding the dust and mite circulation. The heating mesh is made to measure, both in size and electric power.
NO HARMFUL ELECTROMAGNETIC EMISSIONS
The application must be performed carefully on clean and plain surfaces. Extremely reduced thickness of the heating layer, of 4,00 mm (0,16 in) allows interventions with minimal height. All the heating elements are connected to power in parallel, thus the system can operate even in case of partial damage, excluding from supply a floor area of 1,00 m² (10,76 ft²).
Carbon fiber heating cables with thermal insulation on the bottom, fixed on alkali resistant fiberglass mesh. Total thickness 4.00 mm (0.16 inch approx).
Temperature control can be made using a thermostat or an electronic control unit connected with a temperature sensor.