Powered by PrivacyPolicies.com

CUSTOMIZED UNDERFLOOR HEATING PANEL FOR INDOOR cod. PVSI

APPLICATION AREA
Underfloor heating panel is ideal for both types of working: new floors and renovations. Radiant heating principle of the system does not cause air movement and the bodies are heated directly, thus it is avoided dust and acrid circulation. Panels have customized sizes and power. Due to multilayer composition of the panel, heat is spread uniformly, resulting a minimal heat dispersion downwards of approximatively 5%.

NO HARMFUL ELECTROMAGNETIC EMISSIONS

OPERATIONAL FEATURES
The application must be performed carefully on clean and plain surfaces. Extremely reduced thickness of the heating layer, of approximately 5,00 mm (0,2 inch approx.) allows interventions with minimal height. All the heating elements are connected to power in parallel, thus the system can operate even in case of partial damage, excluding from supply a floor area of 1,00 m² (10,76 ft²).

CARBON FIBER
Carbon fiber is flexible, does not oxidize, does not produce harmful electromagnetic fields during electricity flow, has no dimensional variations as the temperature changes nor deterioration of ohmic values. No wearing and no maintenance required. Its high resistivity permits significant energy savings.

COMPOSITION
Carbon fiber heating cables coated by insulating and thermal conductive layers. Total thickness of 5,00 mm (0,20 inch approx.).

TEMPERATURE CONTROL
Activation and deactivation of the heating system can be automatized using an electronic controller (T705) operating with temperature probe, which must be installed in the heated area. Some situations require the installation of power splitter (T801) for halving of the installed power in case of a reduced quantity of total power. Furthermore, the installation of a thermostat or chrono-thermostat is enough to control efficiently the temperature in the room.
Top