UNDER PLASTER MODULAR HEATER FOR INDOOR cod. PIR1

APPLICATION AREA
Under plaster modular heater is ideal for each type of indoor walls, both for new building and renovations. Radiant heating principle of the system does not cause air movement and the bodies are heated directly, thus it is avoided dust and acrid circulation. The system has two standard sizes (see the table).

NO HARMFUL ELECTROMAGNETIC EMISSIONS

OPERATIONAL FEATURES
The application must be performed on the wall, both horizontally or vertically, taking into consideration that the heating side, marked by the label “Lato scaldante/Heating surface”, must be oriented towards the room ambiance. Power cord must be inserted into a corrugated tube and placed inside the wall. All electric connections must be introduced inside of a junction box. All the modules are connected to power in parallel, thus the system can operate even in case of partial damage, excluding from supply just one module. The system can be installed also in bathrooms, respecting the warnings from instruction leaflet.

COMPOSITION
Carbon fiber heating cables applied on insulation band, fixed on alkali resistant fiberglass mesh. Total thickness of 5,00 mm (approx. 0,2 in).

TERMPERATURE CONTROL
Activation and deactivation of the heating system can be automatized by aim of an electronic controller (T705) operating with temperature probes, which must be installed in the heated area. Furthermore, the installation of a thermostat or chrono-thermostat is enough to control efficiently the temperature in the room.
Top